DeviceLib für myGEKKO

Heidelberg Amperified connect.home

Wallbox • MODBUS TCP (DDF)

Heidelberg Amperified

Description

Device image

Heidelberg Amperfied / connect.home The Heidelberg Amperfied connect.home is a robust AC charging solution for residential use. System integration into the OS E-Mobility system is based on Modbus TCP, allowing precise control of dynamic load management, energy monitoring, and PV surplus charging.

Technical Data:

  • Charging power: Designed for up to 11 kW (3-phase, 16 A).

  • Energy meter: Continuous reading of charging data via the Modbus protocol.

  • Requirement: This DDF requires firmware version 1.0.8 (or higher) on the charging station. Modbus communication via this DDF is not possible with older firmware versions.

  • Phase operation: Fixed 1-phase or 3-phase installation (dynamic phase switching during an active charging session is not supported).

General Info

Manufacturer Type Protocol Model Version ID
Heidelberg Amperified Wallbox MODBUS TCP (DDF) 1 1 0x0A00000A00010100

Documents

DDF Items

ID Name Unit Type Direction
0 Car state 65= A (no car), 66= B (car connected), 67= C (charging), 68= D (charging with ventilation), 69= E (error), 70= F (communication error) int IN
1 Voltage L1 V real IN
2 Voltage L2 V real IN
3 Voltage L3 V real IN
4 Ampere L1 A real IN
5 Ampere L2 A real IN
6 Ampere L3 A real IN
7 Temperature real IN
8 Max Current A real IN
10 Power Total kW real IN
11 Energy Total Wh real IN
12 Power unit kW string IN
13 Energy unit Wh string IN
14 Current Set A real OUT
16 Phases int IN
17 RemoteLock int OUT
19 Phases available int IN
20 Layoutversion int IN
21 Lockstate int IN
200 Quality int IN
201 Timestamp datetime IN
204 Info string IN
230 Debug int OUT

Note

*2026-05-27 12:12:58 (hw) ******************************
Last Commit: 513f355c | 2026-05-22 09:39:19
*2026-06-01 09:52:12 (hw) ******************************
Last Commit: fb76e086 | 2026-05-28 10:59:44